| FLINKEN PLASTERING mix is produced according to the requirement of BS EN 998-1; incorporating standardized binder, well graded silica sand, water retention ability additive for all type of brick and block rendering.
|
Please enter valid quantity.
Product Description
|
|
| ADVANTAGES
|
|
|
- Economical-saves time and money.
- Premixed to ensure good consistent quality. Hairline crack reduced.
- Simple to use. No gauging of materials. Just add water.
- Highly workability buttery mix obtained every time.
- Reduce the risk of efflorescence and bleeding in cement.
|
|
|
| MIXING GUIDE
|
|
|
| 1. Mix one bag (40kg) of FLINKEN PLASTERING with approximately 8-9.2 litres of clean water.
|
| 2. Mix continuously 3-5 minutes until a uniform paste is achieved and ensure the mix is from lumps.
|
| 3. Placing should be completed within 60 minutes after start of mixing.
|
|
|
| TECHNICAL DATA
|
|
|
|
|
|
|
|
|
|
| Ordinary Portland Cement (OPC)
|
|
|
|
|
|
| Graded Silica Sand (<2mm size)
|
|
|
|
|
|
| Additives to improve open time and adhesion
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Capillary Water Absorption
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Frequently Purchase Together